[labnetwork] Lab Monitoring Solutions

[Henry Taylor]

Hello Mark,

I recently added that to my lab here at NCSU.  I wanted to be able to
monitor the photolithography rooms.  Omega has a very nice solution.
http://www.omega.com/pptst/iTHX-SD.html.  It was very easy for our IT
people to get the webpage set up for remote viewing.

Henry


On Mon, Dec 2, 2013 at 2:47 PM, Mark Heiden <mheiden at engr.ucr.edu> wrote:

> Dear Colleagues, We are closing in on starting up a new class 1,000/100
> facility here at UCR and I am looking for a low cost solution for remote
> monitoring of room conditions for the 2 new clean bays. Has anyone used a
> standalone monitoring system for humidity and temperature that connects to
> Ethernet with software that would allow remote monitoring? Our budget did
> not allow for a sophisticated well integrated solution like the Johnson
> Controls system we have in our first cleanroom, but I still need to know
> the conditions of the new rooms from my remote office.
>
> Any recommendations or experiences good or bad would be appreciated.
>
>
>
> Regards,
>
>
>
>
>
> Mark Heiden
> UC Riverside
> Center for Nanoscale Science and Engineering
> NanoFab Cleanroom Manager
> (951) 827-2551
> mheiden at engr.ucr.edu
>
>
>
>
>
>
>
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://www-mtl.mit.edu/mailman/listinfo.cgi/labnetwork
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20131202/e1cfb57b/attachment.html>