[labnetwork] question about resizing 200mm wafers down to 100mm

[Bill Flounders]

http://wafer-coring-resizing.com/wafer-coring/


Benes Zdenek wrote:
> Hi,
>
> terribly sorry for this unsolicited email, but would any of you know a 
> good reference for a company, that does wafer resizing from 200mm to 
> 100mm wafers? ideally 2 small wafers from one large one, they would 
> also apply protective resist coating on both sides, and round the 
> edges afterwards?
>
> preferably, on the Swiss side of the Atlantic ocean :-)
>
> thanks a lot for the tips
>
> sincerely
>
> zdenek
>
> /--------------------------------------------/
> /Zdenek Benes, PhD/
> /Ebeam, SEM, FIB engineer/
> /Center of MicroNanoTechnology, EPFL/
> /
> /
> /BM 1.127 (BM Building)
> Station 17
> CH-1015 Lausanne
> Switzerland
>
> Phone: +41 21 693 7751
> Fax: +41 21 693 5770
> Email: zdenek.benes at epfl.ch
>
> CMI : http://cmi.epfl.ch//
>
>
>
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://www-mtl.mit.edu/mailman/listinfo.cgi/labnetwork

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20130312/cf7de288/attachment.html>