[labnetwork] Tool PC backups / PC redundancy

[Morrison, Richard H., Jr.]

HI,

Here at Draper we have Win-7 XP machines. The Win7 are backed up on the internal web, the XP we backup on portable hard drives. Anything with a motherboard no longer supported we try to purchase at least one and keep it in stock. Most of them cost us about $1500 which gets expensive but it is better than a down tool.

Rick


Draper Laboratory
Principal  Member of the Technical Staff
Group Leader Microfabrication Operations
555 Technology Square
Cambridge Ma, 02139-3563

www.draper.com
rmorrison at draper.com
W 617-258-3420
C 508-930-3461



From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Nathan Nelson - Fitzpatrick
Sent: Wednesday, November 12, 2014 10:08 AM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Tool PC backups / PC redundancy

Hi Labnetwork,

Over the past year our lab has seen quite a few new tool installations and as a result we now have over thirty tools (microscopes, EBL, deposition/etch systems, etc...) that have some sort of interface with a personal computer.  Many of these personal computers are run-of-the-mill consumer grade PCs and I think that running this many computers over a many-year timescale will mean that failures are virtually guaranteed.  I'm very interested in knowing how larger labs with many computers (with many different port configurations, hardware requirements, and operating systems) prepare for and deal with this problem.

At our site, we are simply cloning the various tool hard drives (using Clonezilla) onto external hard drives that sit on a shelf in my office.  This is time consuming and requires some discipline to keep going.  The other problem with this approach is that it does not really protect us in the case of non-disk hardware failures (such as a motherboard failure).  I'd love to know the philosophies and approaches that larger labs employ to deal with this problem.

Thanks,
  -Nathan
--
Nathan Nelson-Fitzpatrick  PhD
Nanofabrication Process Engineer
Quantum NanoFab
University of Waterloo
200 University Avenue West
Waterloo, ON   Canada  N2L 3G1
Ph: +1 519-888-4567 ext. 31796




________________________________
Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper Laboratory. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20141113/aa7a50b6/attachment.html>