[labnetwork] Fw: Implementing Lock-out/Logins on AJA Phase II J sputter system

[Eric Lim]

Hi Mark, I've got the phase II J laptop hooked up to an external monitor/keyboard, and interlock the power to the monitor. 
Eric

Sent from my phone

> On Aug 17, 2017, at 10:02, Mark Hofheins <mhofheins at unm.edu> wrote:
> 
> 
> 
> Mark Hofheins
> 
> mhofheins at unm.edu
> 
> 505-710-3527
> 
>  
> 
> Micro Electronics Technician 
> 
> Manufacturing Engineering
> 
> University of New Mexico MTTC
> 
> 800 Bradbury S.E.  Suit 235
> 
> Albuquerque, New Mexico
> 
> 87106-4346
> 
> 
> 
> 
>  
> From: Mark Hofheins
> Sent: Thursday, August 17, 2017 7:46 AM
> To: labnetwork-bounces at mtl.mit.edu
> Subject: Implementing Lock-out/Logins on AJA Phase II J sputter system
>  
> Hello all,
> 
> We have an AJA Phase II J sputter tool that we need to implement our "Login" system on.
> 
> The system allows for  a open /closed circuit at 24v or 115v.
> 
> Most all of the sputter system is 230v. I do not want to have to power up the computer each time for someone to login and be able to use the tool. 
> 
> At this point I believe that my best option is to have an electronic valve in the main plasma gas line as all gasses are routed through a single line.
> 
> I am looking for suggestions if anyone has a similar system in place on an AJA.
> Thank you,
> 
> 
> 
> Mark Hofheins
> 
> mhofheins at unm.edu
> 
> 505-710-3527
> 
>  
> 
> Micro Electronics Technician 
> 
> Manufacturing Engineering
> 
> University of New Mexico MTTC
> 
> 800 Bradbury S.E.  Suit 235
> 
> Albuquerque, New Mexico
> 
> 87106-4346
> 
> 
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://www-mtl.mit.edu/mailman/listinfo.cgi/labnetwork
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20170817/c5e4c1e4/attachment.html>