[labnetwork] Cobilt mask aligner parts to give away.

[Everly, Richard]

We have one of the working in an undergrad lab I would be interested in your parts list and any pics you might have of them.

Richard Everly
Research Engineer
Nanotechnology Research and Education Center (NREC)
University of South Florida
Mailstop ENB 118
4202 E. Fowler Ave
Tampa, FL 33620

PH:   813-974-5365
FAX: 813-974-3610
everly at usf.edu<mailto:everly at usf.edu>
www.nrec.usf.edu<http://www.nrec.usf.edu/>

From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Robert Vandusen
Sent: Thursday, June 01, 2017 4:20 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Cobilt mask aligner parts to give away.

Hi Everyone.
Many years ago before my time here we got rid of a Cobilt Mask aligner (not sure of the model #, CA - something)
Anyhow I found 3 boxes of spares (boards, chucks, solenoids etc. etc.)  I have no use for these but know how valuable these parts could be to someone who still uses one of these aligners.

If anyone has any use for these, we could try to ship them to you.
I do have a partial list of the spares if interested.

Thanks
Robert Vandusen
Microfabrication and FANSSI Cleanlab Facility Manager
Electronics Department
Carleton University
room: 4184 Mackenzie Building
613-520-2600 ext 5761
rvanduse at doe.carleton.ca<mailto:rvanduse at doe.carleton.ca>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20170602/9d53f3a9/attachment.html>