[labnetwork] Seeking advice on manual/semiautomatic wedge bonders

[Michael Khbeis]

Robert, 

I highly recommend http://www.westbond.com/4700E.htm

Great semi-automatic system. 

Best, 

Dr. Michael Khbeis
Director, Washington Nanofabrication Facility (WNF) 
National Nanotechnology Coordinated Infrastructure (NNCI)
University of Washington
Fluke Hall, Box 352143
(O) 206.543.5101
(F) 206.221.1681
(C) 443.254.5192
khbeis at uw.edu
www.wnf.washington.edu/

> On Jun 20, 2018, at 7:00 AM, Robert Vandusen <RobertVandusen at cunet.carleton.ca> wrote:
> 
> Hi everyone.
> We are currently looking into possibly purchasing a new manual or semiautomatic wedge bonder for our facility.
>  
> If anyone would like to email me privately or chat offline about any recommended/or perhaps not recommended models that would be appreciated.
>  
> Thanks
> Robert Vandusen
> Microfabrication Cleanlab Facility Manager
> Electronics Department
> Carleton University
> room: 4184 Mackenzie Building
> 613-520-2600 ext 5761
> Robert_vandusen at cunet.carleton.ca <mailto:Robert_vandusen at cunet.carleton.ca>
>  
> 
>  
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu <mailto:labnetwork at mtl.mit.edu>
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork <https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20180621/6e418695/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 1350 bytes
Desc: not available
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20180621/6e418695/attachment.bin>