[labnetwork] Liftoff ink for inkjet printer

[Dr. Aamer Mahmood]

Hello All,
We have a Dimatix DMP2850 and a Pixdro LP50 inkjet printer systems with which we'd like to print a pattern for liftoff on silicon and glass substrates. The liftoff films will be metals or metal oxides typically 100 nm thick deposited using physical vapor deposition techniques like evaporation. Critical feature sizes will be ~50 microns. I would appreciate any information on products we can use for this application. Ideally the product should be soluble in acetone.
Thanks.

--
Aamer Mahmood
Senior Scientist
Qatar Environment and Energy Research Institute, Qatar Foundation
Doha, Qatar
Tel: +974 44548132 (work)

www.qeeri.org.qa




This email message, including any attachments is intended solely for the addressee(s), and may contain information that is confidential or legally protected. Any use, disclosure, copying, printing or distribution of the information contained herein by persons other than the designated addressee is unauthorized and may be unlawful. If you believe that you have received this email in error, please notify the sender immediately and delete this email and any attachments from your system and discard any printout thereof. Qatar Foundation makes no warranty that this email is error- or virus-free .The views, opinions, conclusions, and other information expressed in this email are not necessarily endorsed by Qatar Foundation unless otherwise indicated by an authorized representative. As such, Qatar Foundation does not accept any liability for any emails and attachments that may violate the relevant applicable laws.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20181113/32fcec75/attachment.html>