[labnetwork] Nanospec 180 repair help

[Jaydeep Patel]

Hello Bill,

Although I am not sure if he is still active, try Brian Jamrus in Santa 
Cruz, CA.  He had repaired couple of old Nanospec tools for us many years 
ago.

Brian Jamrus
321 Ingalls Street
Santa Cruz, CA 95060
ph: 831-454-0713
alt: 831-212-1660
bjamrus at aol.com
http://bandjspecialties.com/services



----------------------------------------------------------
Jaydeep Patel
GCE Market, Inc.   (Global Capital Equipment Market)
1001 Lower Landing Rd, Suite 307
Blackwood, NJ 08012 USA
ph:  + 1.856.401.8900
email: jd at GCEmarket.com
http://www.GCEmarket.com
LinkedIn: http://www.linkedin.com/in/JaydeepPatel

Our Photolithography lab is located in Livermore, CA USA





From:   "Bill Kiether" <wjkiethe at ncsu.edu>
To:     labnetwork at mtl.mit.edu
Date:   11/10/2020 08:14 PM
Subject:        [labnetwork] Nanospec 180 repair help
Sent by:        labnetwork-bounces at mtl.mit.edu



Hello, 

We have an ancient Nanospec 180 that is having some problems with 
measurement. Does anyone know a good repair shop that still works on 
these? 

Bill Kiethe
wjkiethe at ncsu.edu
NCSU Nanofabrication Facility
_______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu
https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20201111/c4b9096e/attachment.html>