[labnetwork] SUSS mask aligners spare parts

[Nava Ariel-Sternberg]

Many thanks everyone for all the responses I got (some directly to me). We
have some leads that we will follow (although still need to think about the
sharpie on the screen idea J ). 

-Nava

 

 

Dr. Nava Ariel-Sternberg

Senior Director of CNI Labs

Columbia University

CEPSR/MC 8903 

530 west 120th st. NY

NY 10027

Office: 212-8549927

Cell: 201-5627600

 

 

From: Lewis,William <blewis at eng.ufl.edu> 
Sent: Thursday, June 23, 2022 9:01 AM
To: Nava Ariel-Sternberg <na2661 at columbia.edu>; labnetwork at mtl.mit.edu
Subject: RE: [labnetwork] SUSS mask aligners spare parts

 

Hi Nava,

 

We had the same failure on our MA6.  We purchased a new VCU from Suss and it
didn't fix the issue.  There was a signal loss somewhere else in the system.
So... I bypassed the Suss video system entirely and bought video processor
(link below to similar)and just connected left and right microscope cameras
to the video processor.  This provides split screen live image of left and
right cameras.  It's been like this for about 10 years and works fine for
us.  You lose the ability to store an overlayed image (i.e. Grab Image Key)
for alignment needed for high mag alignment.   We get around that by marking
the monitor screen with a Sharpie.  Sounds crude but works great!  The new
$8000 Suss Video Controller Unit was a waste of money in our case.

 

https://www.amazon.com/UHPPOTE-Channel-Splitter-Processor-Control/dp/B06WD13
LTB
<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_UHPPOTE
-2DChannel-2DSplitter-2DProcessor-2DControl_dp_B06WD13LTB&d=DwMFAg&c=009klHS
Cxuh5AI1vNQzSO0KGjl4nbi2Q0M1QLJX9BeE&r=kT6DK8e2osjMTcm1IWkUiYmAD2t8D_2_a0MJG
xzQcZ8&m=vSH-CsTHWsVvTVFTLWUSeevE0yaF-7lDP_BYg_FJDQGDbDSBTTratwOi4ULtH30K&s=
LS3dgZH0IiEi81-xc3lQfuQpuViNDstYDBb2kg1MrN4&e=> 

 

 

Bill Lewis

Research Service Center

University of Florida

1041 Center Dr

Gainesville, FL 32611

walewis at ufl.edu <mailto:walewis at ufl.edu> 

3five2-258-zero5zero7

https://rsc.aux.eng.ufl.edu/
<https://urldefense.proofpoint.com/v2/url?u=https-3A__rsc.aux.eng.ufl.edu_&d
=DwMFAg&c=009klHSCxuh5AI1vNQzSO0KGjl4nbi2Q0M1QLJX9BeE&r=kT6DK8e2osjMTcm1IWkU
iYmAD2t8D_2_a0MJGxzQcZ8&m=vSH-CsTHWsVvTVFTLWUSeevE0yaF-7lDP_BYg_FJDQGDbDSBTT
ratwOi4ULtH30K&s=gEpYLzd-QuLeDebbfRlq_Rfl_C8w7n7cPwR3rDr1TuM&e=> 

 

 

 

 

From: labnetwork <labnetwork-bounces at mtl.mit.edu
<mailto:labnetwork-bounces at mtl.mit.edu> > On Behalf Of Nava Ariel-Sternberg
Sent: Wednesday, June 22, 2022 9:27 AM
To: labnetwork at mtl.mit.edu <mailto:labnetwork at mtl.mit.edu> 
Subject: [labnetwork] SUSS mask aligners spare parts

 


[External Email] 

Hi all, 

It was great to see everyone at the UGIM earlier this month. 

We need to replace the video card of our SUSS mask aligner (MA6). Lead time
from the vendor is 6 months. 

Any leads on alternative vendors for mask aligners parts would be greatly
appreciated!

Thanks,

Nava

 

Dr. Nava Ariel-Sternberg

Senior Director of CNI Labs

Columbia University

CEPSR/MC 8903 

530 west 120th st. NY

NY 10027

Office: 212-8549927

Cell: 201-5627600

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220623/c56eb14f/attachment.html>