[labnetwork] Gas Panel Vendor

[Morrison, Richard H., Jr]

Hi Bill,

I am at Draper Laboratory and when I need a gas panel made we use GMP located in Ayer Mass.

Ask for Joe Fortier

https://gmppiping.com/

Rick

Richard Morrison
PMTS
Draper Laboratory
555 Technology Square
Cambridge Ma  02139
Office: 617-258-3420
Cell: 508-930-3461



From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of William Kiether
Sent: Tuesday, March 29, 2022 10:52 AM
To: labnetwork at mtl.mit.edu
Cc: Philip Barletta <pbarlet at ncsu.edu>
Subject: [labnetwork] Gas Panel Vendor

Hello,

Does anyone have a good vendor for making panels (regulator, purging lines, etc see attached pic). Most of our gas cabinets use a Spectra Gas panel, but they are ~30 years old, and the company no longer exists. Our newest vendor (not named) has become very expensive ($17K) for a six valve panel for silane.  Who have you used, and what is the ballpark range for a six valve panel for toxics/flammables?

Bill Kiether
NCSU Nanofabrication Facility
wjkiethe at ncsu.edu<mailto:wjkiethe at ncsu.edu>
________________________________
Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220329/c5d11bd2/attachment.html>