[labnetwork] CDA pressure booster?

[Peder Lenvik]

https://www.maxprotech.com/products/gas-boosters/

not sure of flow rates, etc. but something like this should work.




Peder

-----Original Message-----
From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Iulian
Codreanu
Sent: Tuesday, October 4, 2022 7:33 AM
To: Fab Network <labnetwork at mtl.mit.edu>
Subject: [labnetwork] CDA pressure booster?

Dear Lab Network,

The new ion mill I expect early next year requires 160 psig CDA, which is
more than what my nominally 100 psig CDA system can provide.

I am writing to ask for advice on what the best approach for providing
160 psig may be. I would like to avoid installing a compressor outside of
the cleanroom and having to penetrate the cleanroom envelope.

Thank you very much,

Iulian

--
iulian Codreanu, Ph.D.
Director, Nanofabrication Facility
University of Delaware
Harker ISE Lab, Room 163
221 Academy Street
Newark, DE 19716
302-831-2784
http://udnf.udel.edu


_______________________________________________
labnetwork mailing list
labnetwork at mtl.mit.edu
https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork