<div dir="auto">Dear Colleagues,<div dir="auto"><br></div><div dir="auto">The central chilled water pump at the facility where the LSU cleanroom is housed died earlier this week. Facilities told me that they have no plans for replacing the pump. The cost is too high (15K) and most of the beamline endstations (our cleanroom lives inside of a synchrotron) have switched to local chillers.</div><div dir="auto"><br></div><div dir="auto">So I have two options:</div><div dir="auto"><br></div><div dir="auto">1). Buy 4 small chillers for an e-beam evaporator, SEM, ICP, sputtering system. This number will grow in the future.</div><div dir="auto"><br></div><div dir="auto">2). Buy one large chiller and connect it to the existing 2" diameter cooling pipe network that is plumbed around the cleanroom perimeter.</div><div dir="auto"><br></div><div dir="auto">I lean towards option #2 but it is less flexible than #1 and could put us in the same situation we are in now (e.g. most machines down) in the case of a failure.</div><div dir="auto"><br></div><div dir="auto">The infastructure of our cleanroom is about 25 years old. So I wanted to ask the list members to get a more modern take on chilled water. Do modern cleanrooms use central chilled water systems or is the local chiller model more popular given the added flexibility and more distributed failure model?</div><div dir="auto"><br></div><div dir="auto">Thanks!</div><div dir="auto"><br></div><div dir="auto">Regards,</div><div dir="auto">Kevin</div><div dir="auto"><br><div data-smartmail="gmail_signature" dir="auto">--<br>Kevin McPeak<br>Assistant Professor<br>Department of Chemical Engineering<br>Louisiana State University<br>email: <a href="mailto:kmcpeak@lsu.edu">kmcpeak@lsu.edu</a><br>phone: 225-578-0058</div></div></div>