<div dir="ltr">Hello, <div><br></div><div>We are trying to test some Ebara dry pump/blower combos that we got from a tool donation and are having problems with the setup. The pumps are EST200WN models with both a pump and a blower, but the controllers are only recognizing them as EST10N, which are smaller units w/o the blower option. When powered up, only the pump will turn on. This occurs whether we are using the Ebara controller or the remote option with jumpers. The power is 208 - 3phase, and we also tried switching the 2 of the phases. Has anybody encountered this problem? The Ebara documentation has not been helpful for this issue. </div><div><br></div><div>Bill Kiether</div><div>NCSU Nanofabrication Facility</div></div>