<div dir="ltr">Hi Russ<div><br></div><div>We have a separate room in our cleanroom dedicated to PDMS mixing and molding. We have gloves of a very different color in that room which are required to be worn when working with PDMS and are required to be removed before exiting the room. Only the fully cured devices, cut out and with inlet/outlet ports already punched out, may be removed from the room. That said, most researchers use PDMS in their own (non-cleanroom) labs with very satisfactory results.</div><div><br></div><div>Regarding "gotchas", including tips and tricks, here are a few:</div><div>- Be sure to mix the two components VERY well, like for 5ish minutes. If they are not mixed well, the cured PDMS may stick to the master.</div><div>- An aluminum tray that can accommodate a wafer is very helpful. We got ours from Kitchendance.com, item #80063, which is big enough for a 4" wafer.</div><div>- A 1mm biopsy punch is a great way to add inlet/outlet ports.</div><div>- The main cause of failure of the master, next to delamination, is cracking of the wafer.</div><div>- It is easier to cut out only the devices needed. Trying to remove the wafer from the PDMS mold can easily crack the wafer.</div><div>- "Silanizing" the master can make it easier to remove the mold. We use Trichloro(1H, 1H, 2H, 2H-perfluoro-octyl) silane in a vacuum desiccator. This is really only necessary if there are small features with high aspect ratios.</div><div>- A drop of IPA when removing the PDMS mold can be very helpful. It acts as a lubricant.</div><div><br></div><div>Regards</div><div><br></div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div style="font-size:12.8px"><span style="font-size:small">Eric</span></div><div style="font-size:12.8px"><span style="font-size:small"><br></span></div><div style="font-size:12.8px"><span style="font-size:small">Eric Johnston</span><br></div></div><div><div>Director, Quattrone Nanofabrication Facility</div><div>Singh Center for Nanotechnology</div>University of Pennsylvania<div>3205 Walnut Street, #109A</div><div><a href="mailto:ericdj@seas.upenn.edu" target="_blank">ericdj@seas.upenn.edu</a><br><div>T. <a href="tel:215.573.6695" value="+12155736695" target="_blank">215.573.6695</a></div></div></div><div>Questions? See the QNF <a href="https://wiki.nano.upenn.edu/wiki/index.php?title=Frequently_Asked_Questions#How_do_I_get_started.3F" target="_blank">FAQ</a>.</div></div></div></div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Thu, Sep 4, 2025 at 8:08 AM Russ Renzas <<a href="mailto:rrenzas@unr.edu">rrenzas@unr.edu</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">



<div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
Is anyone familiar with PDMS (or other material) mold fabrication? Any procedures or gotchas to worry about? </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
Bio faculty member asking if we can make molds in our fab. I only know how to make semiconductor, photonic, and quantum devices. </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
Thanks!</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
Russ</div>
<div id="m_6080742350942819691ms-outlook-mobile-body-separator-line" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt" dir="ltr">
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
<br>
</div>
</div>
<div style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt" id="m_6080742350942819691ms-outlook-mobile-signature">
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
Russ Renzas</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif;font-size:12pt">
University of Nevada, Reno</div>
</div>
</div>

_______________________________________________<br>
labnetwork mailing list<br>
<a href="mailto:labnetwork@mtl.mit.edu" target="_blank">labnetwork@mtl.mit.edu</a><br>
<a href="https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!IBzWLUs!QBwVjjk3FnBJge1V1iVK2eI93fYFZX5W8HHsErKejAMIgIM6vPEbkOBJE9_Q-3UQBJCFSmuYreoexXXboVE$" rel="noreferrer" target="_blank">https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!IBzWLUs!QBwVjjk3FnBJge1V1iVK2eI93fYFZX5W8HHsErKejAMIgIM6vPEbkOBJE9_Q-3UQBJCFSmuYreoexXXboVE$</a> <br>
</blockquote></div>