<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div class="elementToProof" style="margin-top: 1em; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
I have had good luck over here using a Mo liner with a graphite spacer beneath the crucible. We don’t really have any special cleaning procedures for the gold pellets when loading. We typically order 5N, 1/8" gold from Lesker, but with costs shooting up, we
recently switched to 4N, 3 mm gold pellets from MSE. It seems to still be depositing well for us without any noticeable issues and was about 13% cheaper.</div>
<div class="elementToProof" style="margin-top: 1em; margin-bottom: 1em; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
As David mentioned, we do see the gold wicking up the sides of the crucible, so we tend to keep it filled as close to half-full as possible to reduce the chances of the gold wicking over the sides and down into the pocket.</div>
<div id="Signature" class="elementToProof">
<div class="elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Kind regards,</div>
<div class="elementToProof" style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"><span style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);"><b><i>Dylan Bartusiak</i></b></span>
</div>
<div class="elementToProof" style="text-align: left; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Facility/Lab Manager</div>
<div class="elementToProof" style="text-align: left; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<a href="https://www.colorado.edu/facility/cosinc/" target="_blank" id="OWAfc057687-b829-a006-7511-530f6f242388" class="OWAAutoLink" style="margin: 0px;">COSINC Fabrication</a></div>
<div class="elementToProof" style="text-align: left; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
University of Colorado Boulder</div>
<div class="elementToProof" style="text-align: left; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt;">
<span style="color: rgb(34, 34, 34);">303-492-2656</span><span style="color: rgb(0, 0, 0);"> |
<a href="https://www.linkedin.com/in/dylanbartusiak/" target="_blank" id="OWA7732bc55-3587-31e2-d337-87b287af0aa1" class="OWAAutoLink" style="margin: 0px;">
LinkedIn</a></span></div>
<div class="elementToProof" style="text-align: left; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof" style="text-align: left; line-height: 20px; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<i>If your work used COSINC resources, please acknowledge:</i></div>
<div class="elementToProof" style="text-align: left; line-height: 20px; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<i>COSINC, RRID:SCR_018985</i></div>
<div class="elementToProof" style="text-align: left; margin: 0px; font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
</div>
<div id="appendonsend"></div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> labnetwork <labnetwork-bounces@mtl.mit.edu> on behalf of David Barth <dsbarth@engineering.upenn.edu><br>
<b>Sent:</b> Thursday, September 17, 2026 9:58 AM<br>
<b>To:</b> Chandan H B <chandanachar95@gmail.com><br>
<b>Cc:</b> labnetwork@mtl.mit.edu <labnetwork@mtl.mit.edu><br>
<b>Subject:</b> Re: [labnetwork] Black Layer Formation During Au E-Beam Evaporation</font>
<div> </div>
</div>
<div>
<div>[External email - use caution]</div>
<br>
<div>
<div dir="ltr">Hi Chandan,
<div><br>
</div>
<div>I generally agree with the previous comments, but also note <a href="http://csmantech.org/wp-content/acfrcwduploads/field_5e8cddf5ddd10/post_2621/122.pdf" originalsrc="http://csmantech.org/wp-content/acfrcwduploads/field_5e8cddf5ddd10/post_2621/122.pdf">
this paper</a> which found significantly less spitting from Au deposited from Mo crucibles vs W.
<div><br>
</div>
<div>One other note is that Au wets W and Mo much better than carbon, so you'll find that the molten metal likes to creep up the sides of the crucible, which can be inconvenient.</div>
<div><br>
</div>
<div>Best,</div>
<div>David Barth</div>
<div>QNF, Singh Center for Nanotechnology<br>
University of Pennsylvania</div>
</div>
</div>
<br>
<div class="x_gmail_quote x_gmail_quote_container">
<div dir="ltr" class="x_gmail_attr">On Thu, Sep 17, 2026 at 11:55 AM Nadia Pervez <<a href="mailto:np65@rice.edu">np65@rice.edu</a>> wrote:<br>
</div>
<blockquote class="x_gmail_quote" style="margin:0px 0px 0px 0.8ex; border-left:1px solid rgb(204,204,204); padding-left:1ex">
<div dir="ltr">Hi Chandan,
<div><br>
</div>
<div>We get a layer of carbon on the surface of our Au slug, which could be what you are seeing. We use a fabmate crucible liner. Many of our users are depositing Au for liftoff and/or on polymer substrates, and we also have some users mounting samples with
kapton tape or even using kapton tape stencils. The chamber has an excellent base pressure (can go down to 10-9s).</div>
<div><br>
</div>
<div>These are our practices:</div>
<div>- We wipe down both the slug and the liner with IPA every time we change the crystal (it is a load locked system with most of our users depositing Au; we typically vent for crystal changes 3x as often as adding source material), after which point we do
not handle either directly with gloves</div>
<div>
<div>- We also occasionally plasma clean the Au slug if it doesn't look clean with just the IPA</div>
</div>
<div>- When we add material we wash the Au pellets with IPA before loading them</div>
<div>- We buy our pellets from Lesker, 99.999% 1/8" diameter x 1/8" long </div>
<div><br>
</div>
<div>We started these practices after having problems with Au spitting. We also changed the fabmate liner at that time (we had used the same one for many years). Back when we had the spitting problem we were going to perform ToF-SIMS but never got around to
it. At that time Demis John suggested adding Ta pellets for gettering, but we ended up not needing them.</div>
<div><br>
</div>
<div>Thanks,</div>
<div>Nadia</div>
</div>
<br>
<div class="x_gmail_quote">
<div dir="ltr" class="x_gmail_attr">On Thu, Sep 17, 2026 at 6:46 AM Chandan H B <<a href="mailto:chandanachar95@gmail.com" target="_blank">chandanachar95@gmail.com</a>> wrote:<br>
</div>
<blockquote class="x_gmail_quote" style="margin:0px 0px 0px 0.8ex; border-left:1px solid rgb(204,204,204); padding-left:1ex">
<div dir="ltr">
<p>Dear LabNetwork Community,</p>
<p>We would like to seek inputs from cleanroom/fab facility managers and process owners regarding an issue observed during
<strong>Au deposition in our E-Beam Evaporators</strong>.</p>
<p>We have observed the formation of <strong>black/dark layer on the Au charge after a few melt cycles</strong>. The observation occurs during repeated melting of Au in a tungsten liner/crucible. We are currently investigating whether this could be related
to <strong>material surface contamination, crucible/liner condition, outgassing, chamber history, or the Au pre-cleaning/conditioning procedure</strong>.</p>
<p>We would appreciate your experience on the following:</p>
<ul>
<li>Have you observed <strong>black/dark spots or a black layer forming on Au during repeated E-beam melting/evaporation</strong>?</li><li>What <strong>Au purity and material form</strong> do you use?</li><li>Do you perform any <strong>cleaning/degreasing of the Au charge before loading</strong>? If yes, what procedure?</li><li>Do you follow a specific <strong>crucible/liner cleaning or replacement procedure</strong>?</li><li><span style="background-color:transparent">If you have identified a </span><strong style="background-color:transparent">root cause or corrective action</strong><span style="background-color:transparent"> for a similar observation, any details would be highly
appreciated.</span></li></ul>
<p>Our objective is to compare practices across facilities and determine whether this is a
<strong>material-handling, source/liner, chamber-condition, or process-related phenomenon</strong>.</p>
<div>Any suggestions/inputs are highly appreciated.</div>
<div>Thanks in advance!</div>
<div><br>
</div>
<div>Regards,</div>
<div>CHANDAN H B</div>
<div>THIN FILMS ENGINEER</div>
</div>
_______________________________________________<br>
labnetwork mailing list<br>
<a href="mailto:labnetwork@mtl.mit.edu" target="_blank">labnetwork@mtl.mit.edu</a><br>
<a href="https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!PcititFMkQu_!oNdA1u1fhiZ-k36H_UKkr8Lsfcnq3pZQnfokxsMSKdW6k7hq3loncD-Ggit-zZ25yBefkr9wG4rtcw08KqsTsjc$" originalsrc="https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!PcititFMkQu_!oNdA1u1fhiZ-k36H_UKkr8Lsfcnq3pZQnfokxsMSKdW6k7hq3loncD-Ggit-zZ25yBefkr9wG4rtcw08KqsTsjc$" rel="noreferrer" target="_blank">https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!PcititFMkQu_!oNdA1u1fhiZ-k36H_UKkr8Lsfcnq3pZQnfokxsMSKdW6k7hq3loncD-Ggit-zZ25yBefkr9wG4rtcw08KqsTsjc$</a>
<br>
</blockquote>
</div>
<div><br clear="all">
</div>
<div><br>
</div>
<span class="x_gmail_signature_prefix">-- </span><br>
<div dir="ltr" class="x_gmail_signature">
<div dir="ltr">
<div>Nadia Pervez, PhD</div>
<div>Cleanroom Research Scientist</div>
<div>Shared Equipment Authority (SEA)</div>
<div>Rice University</div>
<div>6100 Main St, MS-686</div>
<div>Houston, TX 77005</div>
<div><a href="mailto:np65@rice.edu" target="_blank">np65@rice.edu</a><br>
</div>
<div>Office: SST-017, <a href="tel:(713)%20348-5069" value="+17133485069" target="_blank">
713-348-5069</a> <br>
</div>
<div>Cell: <a href="tel:(805)%20284-1193" value="+18052841193" target="_blank">805-284-1193</a> </div>
</div>
</div>
_______________________________________________<br>
labnetwork mailing list<br>
<a href="mailto:labnetwork@mtl.mit.edu" target="_blank">labnetwork@mtl.mit.edu</a><br>
<a href="https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!IBzWLUs!WAdyvMztg_XYAAROGoIpue4NsIYV6LcSmHBrADJMpnsLd2XzGsJP4rf9w5dk6rurPWIE740sOpuIWTlE$" originalsrc="https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!IBzWLUs!WAdyvMztg_XYAAROGoIpue4NsIYV6LcSmHBrADJMpnsLd2XzGsJP4rf9w5dk6rurPWIE740sOpuIWTlE$" rel="noreferrer" target="_blank">https://urldefense.com/v3/__https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork__;!!IBzWLUs!WAdyvMztg_XYAAROGoIpue4NsIYV6LcSmHBrADJMpnsLd2XzGsJP4rf9w5dk6rurPWIE740sOpuIWTlE$</a>
<br>
</blockquote>
</div>
</div>
</div>
</body>
</html>