[labnetwork] PVD of YB66

[Kurt Kupcho]

Whatever supplier they buy the Yttrium Boride from has to legally supply a SDS for it.  I would tell them to go back to where they bought it from and ask for one.

From: labnetwork-bounces at mtl.mit.edu [mailto:labnetwork-bounces at mtl.mit.edu] On Behalf Of Himmer, Phil
Sent: Monday, September 28, 2015 12:52 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] PVD of YB66

Hello,

Does anyone have experience with PVD of Yttrium Boride, YB66 specifically. I am reluctant use it in our tools because the research group cannot come up with a MSDS for this material nor do I know how it will effect other processes in our system. Besides possible health concerns is boron a significant concern for cross contamination?

thanks
phil


Dr. Phillip Himmer
Manager Montana Microfabrication Facility
Montana State University
Bozeman Mt 59717

Office Ph: 406-994-7178
email:   philh at ece.montana.edu<mailto:philh at ece.montana.edu>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20150928/fdedd0c5/attachment.html>