[labnetwork] Adsorber maintenance 8200 compressor

[John Nash]

We source ours through Trillium. Their rebuild / service center for cryo pumps is the old Austin Scientific.



Sent from my Sprint Samsung Galaxy S® 6.


-------- Original message --------
From: Kevin McPeak <kmcpeak at lsu.edu>
Date: 12/17/17 11:48 AM (GMT-05:00)
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Adsorber maintenance 8200 compressor

Dear Colleagues,

I need to replace the adsorber in my Brooks 8200 compressor, per the annual maintenance guidelines.

This is my first time sourcing the adsorber. Are most of you simply buying a new one from Brooks/CTI or are you working with 3rd parties to rebuild/exchange your existing adsorber?

If the later, recommendations (offline) would be most appreciated. Thank you

Regards,
Kevin

--
Kevin McPeak
Assistant Professor
Department of Chemical Engineering
Louisiana State University
email: kmcpeak at lsu.edu<mailto:kmcpeak at lsu.edu>
phone: 225-578-0058
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20171217/dfc238c6/attachment.html>