[labnetwork] Adsorber maintenance 8200 compressor

[Tim Gilheart]

Same for us. We also utilize the for vacuum pump repairs

We are fortunately close enough to benefit from their regular delivery/service truck runs to Houston, so shipping costs are also lowered.

-- 
Tim Gilheart, Ph.D.
Research Scientist - Nanofabrication Clean Room Manager,
Shared Equipment Authority (SEA), Rice University
Cell: 832-341-5488 | Office: 713-348-3159 | gilheart at rice.edu


> On Dec 17, 2017, at 11:57 AM, John Nash <jcn8004 at rit.edu> wrote:
> 
> We source ours through Trillium. Their rebuild / service center for cryo pumps is the old Austin Scientific.
> 
> 
> 
> Sent from my Sprint Samsung Galaxy S® 6.
> 
> 
> -------- Original message --------
> From: Kevin McPeak <kmcpeak at lsu.edu>
> Date: 12/17/17 11:48 AM (GMT-05:00)
> To: labnetwork at mtl.mit.edu
> Subject: [labnetwork] Adsorber maintenance 8200 compressor
> 
> Dear Colleagues,
> 
> I need to replace the adsorber in my Brooks 8200 compressor, per the annual maintenance guidelines.
> 
> This is my first time sourcing the adsorber. Are most of you simply buying a new one from Brooks/CTI or are you working with 3rd parties to rebuild/exchange your existing adsorber?
> 
> If the later, recommendations (offline) would be most appreciated. Thank you
> 
> Regards,
> Kevin
> 
> --
> Kevin McPeak
> Assistant Professor
> Department of Chemical Engineering
> Louisiana State University
> email: kmcpeak at lsu.edu <mailto:kmcpeak at lsu.edu>
> phone: 225-578-0058
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20171218/86f5b355/attachment.html>