[labnetwork] UV cleaning/sterilization of safety glasses, labware etc

[Gila,Brent P]

Hello Robert,

For most items soap and water or 70% alcohol solution is CDC recommended 
and fairly easy to do.  With UV light/wands you will have to consider 
effective exposure times and potential shadowing issues.

Best Regards,
Brent
-- 
Brent P. Gila, PhD.
Director of the Nanoscale Research Facility
University of Florida
1041 Center Drive
Gainesville, Florida 32611
Tel:352-273-2245,  Fax:352-846-2877
email: bgila at ufl.edu

On 6/22/2020 2:16 PM, Robert Vandusen wrote:
> *[External Email]*
>
> Hi all.
>
> Hope everyone is well.
>
> Our lab is considering whether to purchase a UV cleaning box/system 
> and possibly a UV cleaning wand for items such as safety glasses, 
> goggles, tweezers, even pens and labware etc.
>
> and I was wondering if anyone has any feedback or recommendations on 
> these type of systems.
>
> Thanks in advance.
>
> Rob
>
> Robert Vandusen
> Technical Officer, Microfabrication Lab
> Electronics Department
> Carleton University
> room: 4184 Mackenzie Building
> 613-520-2600 <tel:613-520-2600> ext 5761
> Robert_vandusen at cunet.carleton.ca 
> <mailto:Robert_vandusen at cunet.carleton.ca>
>
>
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://urldefense.proofpoint.com/v2/url?u=https-3A__mtl.mit.edu_mailman_listinfo.cgi_labnetwork&d=DwICAg&c=sJ6xIWYx-zLMB3EPkvcnVg&r=gl_2fLZA_-_JfH_dOmx7ug&m=DAnkDB7Xkh6fPStQF0cBgO2nho7r4swwIO6KhweZNvY&s=M_YJ4CH51DNaqDxj7obKkXVZimKJWw2yEMSlGCbV6_k&e=

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20200622/2c880255/attachment.html>