[labnetwork] Nanospec 180 repair help

[Matthew Moneck]

Hi Bill,

Have you tried Brumley South (http://brumleysouth.com/crisis-support/995)?  They do a lot of work with Nanometrics tools.  Not sure they handle the 180, but it’s worth a try.  They’re actually located just a few hours from NCSU.

Best Regards,

Matt

--
Matthew T. Moneck, Ph.D
Executive Manager, Claire & John Bertucci Nanotechnology Laboratory
Electrical & Computer Engineering | Carnegie Mellon University
5000 Forbes Avenue, Pittsburgh, PA 15213-3890
Phone:  412-268-5430
ece.cmu.edu<http://www.ece.cmu.edu>
nanofab.ece.cmu.edu<http://www.nanofab.ece.cmu.edu>

From: labnetwork-bounces at mtl.mit.edu <labnetwork-bounces at mtl.mit.edu> On Behalf Of Bill Kiether
Sent: Tuesday, November 10, 2020 4:11 PM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Nanospec 180 repair help

Hello,

We have an ancient Nanospec 180 that is having some problems with measurement. Does anyone know a good repair shop that still works on these?

Bill Kiethe
wjkiethe at ncsu.edu<mailto:wjkiethe at ncsu.edu>
NCSU Nanofabrication Facility
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20201111/68b696af/attachment.html>