[labnetwork] Stainless Steel Tubing

[Iulian Codreanu]

Yes, you can do 1 slpm with 1/4" tubing.

iulian Codreanu, Ph.D.
Director, Nanofabrication Facility
University of Delaware
Harker ISE Lab, Room 163
221 Academy Street
Newark, DE 19716
302-831-2784
http://udnf.udel.edu

On 9/1/2022 12:42 PM, John Ransom wrote:
>
> I have gotten recommendations that I should use 3/8” SS tubing EP 
> 316L, but the availability of that is out into May or June of 2023.  
> ¼” is better.
>
> But can I use ¼” with a process that runs <1slm?  The fittings to most 
> of the tools is ¼” VCR or swagelok.  But I have a 90ft run in one 
> case.  Any guidance is appreciated.
>
> John Ransom
>
> Program Manager – MUSiC Facility
>
> *M*ulti-*U*ser *SiC* Fabrication Facility
>
> University of Arkansas
>
>
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20220901/0dc89142/attachment.html>