[labnetwork] Oxford 80 etcher

[Jim Mitchell]

You could try contacting Classone. They refurb these.
That box sounds like the RF signal box. Tells the system forward and
reflected power but that's just a guess.

Jim

On Wed, Nov 1, 2023 at 3:47 PM Kenneth Mitchell <Kenneth.Mitchell at uvm.edu>
wrote:

> Hi,
>
>
>
> Found out about this forum today from one of the professors.  I am trying
> to resurrect an Oxford80 etcher.  Probably 30 plus years old.  Found a
> manual on the web, but it does not have quite enough information.  Oxford
> UK has not been responsive.  Anyone out there have any experience with this
> tool.  I have facilities hooked up, usual issues.  My issue is there are a
> few things that don’t look right. Like a box just laying loose inside the
> cabinet with wires going into the RF area and a cable coming out into the
> system wiring.  Missing screws in the box cover.  I’m wondering what else
> may be missing.  Would like to get this going for our semi program.
>
>
>
> Thanks in advance.
>
>
>
> Ken Mitchell
> _______________________________________________
> labnetwork mailing list
> labnetwork at mtl.mit.edu
> https://mtl.mit.edu/mailman/listinfo.cgi/labnetwork
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20231101/22255a5c/attachment.html>