[labnetwork] Powder blasting for micromachining

[Simon Doe]

Hello Philipp
A couple of years ago we were looking at something similar. Due to requirements changing we did not proceed but we dealt with Comco Inc from Burlington, USA. I was impressed with them both in communication and when I visited their facility.


Colin Weightman | President | Comco Inc<https://www.comcoinc.com>.

D: 1-818-333-8505 | Office: 1-818-841-5500

2151 North Lincoln Street | Burbank, CA 91504

Regards
Simon

From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Philipp Altpeter
Sent: Thursday, 26 October 2023 4:16 AM
To: labnetwork at mtl.mit.edu
Subject: [labnetwork] Powder blasting for micromachining

Dear labnetwork,

We're currently looking for a way to pattern glass with a high etch rate, and micro powder blasting looks like an excellent candidate.
Can you recommend a manufacturer of powder blasting machines suited for micro machining of glass (BSG)?
We work on rather small wafer sizes, down to single dices with lateral dimensions of a few mm.

Thank you so much in advance!

Philipp

--
Philipp Altpeter
Fakultät für Physik der LMU
LS Prof. Efetov
Geschwister-Scholl-Platz 1
D-80539 München
T. +49 (0)89 2180-3733
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20231025/e1f973f1/attachment.html>