[labnetwork] Linde Supplied Gas Cabinets

[John Nicholson]

Colleagues,

We are in the process of commissioning a new clean room and have discovered
at a late stage some potential configuration problems with the gas sensors
on a Linde supplied gas cabinet. Repeated requests to Linde for information
have yielded no useful response. A lot of consolidation and company
acquisition has been going on among gas vendors lately and I'm wondering if
that may be the cause. If anyone has viable contact information for these
cabinets or knows of a vendor willing to step in, please let me know.
Specifically the sensor in the cabinet needs to be for HBr and the model
number on the installed one is listed as being for HF in the Linde cabinet
manual. It may be that's the correct sensor but I've been unable to confirm
that.

Regards,
-- 
John Nicholson
Nanofabrication Laboratory Manager
Silvio O. Conte Center for Polymer Research, Rm. B111
University of Massachusetts Amherst
120 Governor's Drive
Amherst,MA 01003-9305
Phone: 413-545-2772
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20181031/c139e83b/attachment.html>