[labnetwork] Looking for a FAB with STEPPER capabilities

[Garry J. Bordonaro]

Shimon,

 

We have 200mm capability in i-line and DUV, and many other tools (not sure
which dep tools).  Chris Alpha, cc'd here, can give more details.

 

https://www.cnf.cornell.edu/

 

 

 

Regards,

Garry J. Bordonaro

Microlithographic Engineer

Cornell NanoScale Facility

250 Duffield Hall

343 Campus Road

Ithaca NY 14853-2700

(607) 254-4936

 <mailto:bordonaro at cnf.cornell.edu> bordonaro at cnf.cornell.edu

 <http://www.cnf.cornell.edu/> http://www.cnf.cornell.edu/

 

Please acknowledge CNF in your publications:

"This work was performed in part at the Cornell NanoScale Science &
Technology Facility (CNF), a member of the National Nanotechnology
Coordinated Infrastructure (NNCI), which is supported by the National
Science Foundation (Grant NNCI-2025233)."

 

 

 

 

From: labnetwork <labnetwork-bounces at mtl.mit.edu> On Behalf Of Shimon Eliav
Sent: Saturday, January 31, 2026 12:54 PM
To: Network Fab <labnetwork at mtl.mit.edu>
Subject: [labnetwork] Looking for a FAB with STEPPER capabilities

 

Hello,

An Israeli start-up company is looking for a fab with stepper capabilities.

Their process is quite simple: Metal deposition, lithography with 1 micron
resolution, etching and dicing. Substrate: Si 8".

Regards,

Shimon

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20260202/cf2b6851/attachment.html>