[labnetwork] Curious about issues with Dektak Pro software

[Malhotra, Sandra Guy]

Howdy All,
We recently acquired a Dektak Pro surface profilometer from Bruker and are having persistent problems with the software freezing. We rarely had this issue with our older DektakXT. They updated from software version 6.14 on August 8th to 6.8 on August 27th, so curious if they are having issues with bugs. Is anyone else experiencing problems?

Thanks for your insights!

Sandra G. Malhotra, Ph.D.  |  Senior Laboratory Manager

We would greatly appreciate an acknowledgement of your work in AggieFab:  “The nanofabrication was conducted in the Texas A&M University AggieFab Nanofabrication Facility (RRID:SCR_023639), which is supported by the Texas A&M Engineering Experiment Station and Texas A&M University."

AggieFab Nanofabrication Facility

https://aggiefab.tamu.edu/

Department of Electrical & Computer Engineering, College of Engineering | Texas A&M University

3253 TAMU | College Station, TX 77843

ph: 979.845.3199  |  sandra.malhotra at tamu.edu<mailto:sandra.malhotra at tamu.edu>

- - - - - - - - - - - - - - - - - - - - - - -

TEXAS A&M UNIVERSITY | FEARLESS on Every Front



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mtl.mit.edu/pipermail/labnetwork/attachments/20260909/511929de/attachment.html>